Specifications:
Autotuning
unloaded speed: 4200RMP+/-10%
unloaded current: 1.2+/- 0.2A
Rated speed: 3000RPM +/- 10%
Rated torque: 1.27N.m
Rated current: 11.2+/-1A
Max torque: 3.5N.m
Torque coefficient: 0.082N.m/A
Phase resistance:0.53ohm
phase inductance: 0.6mH
Power: 400W
Weight: 1.6kg
| input voltage |
24~50VDC(36V typical value ) |
| Continuous output current |
6A |
| Maximum pulse frequency |
250K |
| Default rate |
9.6Kbps（Required external conversion interface） |
| protect |
▸Peak value of over current action value 30A + 10%
▸Overload I2t current action value of 300% 5S
▸Overheating action value of 80
▸Overvoltage action value 65V
▸Action value of under voltage voltage 18V |
| Use environment |
occasion |
As far as possible to avoid dust, oil mist and corrosive gases |
| working temperature |
0~+70℃ |
| Storage temperature |
-20℃~+80℃ |
| humidity |
40~90%RH |
| Cooling mode |
Natural cooling or forced air cooling |
Environment:
| Cooling |
Natural Cooling or Forced Convection |
| Environment |
Space |
Avoid dust, oil frost and
corrosive gases |
| Ambient Temperature |
65°C |
| Humidity |
<80%RH |
| Vibration |
5.9m/s² Max |
| Storage Temp. |
-10°C －80°C |
| Weight |
Approx. 1.8 Kg |
- Multi Pulse Input Modes Pulse+Direction
- Opto-isolator Servo Reset Input Port ERC
- Current Loop Bandwidth:（-3dB）2KHz(Typical)
- Speed Loop Bandwidth: 500Hz(Typical)
- Position Loop Bandwidth: 200Hz(Typical)
- Motor Quadrature Encoder Input Interface: Differential Input(26LS32)
- Download parameters via RS232C from PC or Text Display.
- Users can definite subdivisions via external Dial-up switches or software.
- Overcurrent, I2T, Over-voltage, Undervoltage, Overheat, Overspeed, Overerror Protections.
- Green light indicates running, red light indicates protection or offline.
Programmer software V2: http://www.cnc-technics.de/JMC1.0.4.rar
Programmer software V604/603:
http://www.cnc-technics.de/JMC1.7.6.zip
Datasheet: http://www.cnc-technics.de/ihsv60-30-40-48.pdf
